首页 | 本学科首页   官方微博 | 高级检索  
     

封盖注射模设计
引用本文:汪游. 封盖注射模设计[J]. 模具工业, 2002, 0(12): 38-39
作者姓名:汪游
作者单位:宁波车灯电器有限公司,浙江,宁波,315806
摘    要:
分析了封盖的工艺特点 ,进行了模具设计 ,介绍了模具在侧向抽芯机构中靠弹簧的力量进行螺纹抽芯 ,并介绍了其工作过程

关 键 词:抽芯  螺纹  注射模
文章编号:1001-2168(2002)12-0038-02
修稿时间:2002-06-12

Design of the Injection Mould for the Sealing Cover
WANG You. Design of the Injection Mould for the Sealing Cover[J]. Die & Mould Industry, 2002, 0(12): 38-39
Authors:WANG You
Abstract:
The technological characteristics of the sealing cover were analyzed. And a set of injection mould for the cover was designed. In the side core pulling mechanism of the mould, the threaded core pulling was accomplished by relying on the spring force. The working process of the mould was introduced.
Keywords:core pulling  thread  injection mould
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号