| 核电站工程模拟器中的RELAP5建模 |
| |
| 引用本文： | 林萌,苏云,胡锐,杨燕华.核电站工程模拟器中的RELAP5建模[J].原子能科学技术,2005,39(5):429-432. |
| |
| 作者姓名： | 林萌 苏云 胡锐 杨燕华 |
| |
| 作者单位： | 上海交通大学机械与动力学院核科学与系统工程系,上海,200030 |
| |
| 摘 要： | 文章涉及数值反应堆系统(DRS)组成部分之一的核电站热工水力模块的PELAP5建模方法。建模分为:RELAP5源程序的改造;利用原始RELAP5进行电厂的常规建模;利用改造后的RELAP5进行电厂的特殊建模。该电厂模型构造方法不仅可动态采集RELAP5模型节点上的参数,且可动态控制节点上的部分参数,满足核电站工程模拟器的要求。
|
| 关 键 词： | RELAP5 数值反应堆系统 工程模拟器 |
| 文章编号： | 1000-6931（2005）05-0429-04 |
| 收稿时间： | 2004-02-04 |
| 修稿时间： | 2004-02-042004-03-22 |
Modeling by RELAP5 in Nuclear Power Plant Engineering Simulator |
| |
| LIN Meng,SU Yun,HU Rui,YANG Yan-hua.Modeling by RELAP5 in Nuclear Power Plant Engineering Simulator[J].Atomic Energy Science and Technology,2005,39(5):429-432. |
| |
| Authors: | LIN Meng SU Yun HU Rui YANG Yan-hua |
| |
| Affiliation: | Department of Nuclear Science and System Engineering, School of Mechanics and Power Engineering, Shanghai J iaotong University, Shanghai 200030, China |
| |
| Abstract: | Thermal hydraulic calculation module RELAP5 is one part of digital reactor system(DRS).The modeling method by RELAP5 is described.There are mainly following 3 steps: The first is modification of RELAP5 source code;the second is constructing normal model;the third is establishing special model.Thus besides plant-running parameters can be dynamically extracted from RELAP5,it can be dynamically changed in RELAP5.This model is strong enough to meet the needs of nuclear power plant engineering simulator. |
| |
| Keywords: | RELAP5 digital reactor system engineering simulator |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
