Proton conductivity and performance in fuel cells of grafted membranes based on polymethylpentene with radiation-grafted crosslinked sulfonated polystyrene

In this work, a comparative study was carried out of the transport properties and performance in a hydrogen-air fuel cell of the membranes based on polymethylpentene (PMP) with grafted sulfonated polystyrene and the standard Nafion® 212 membrane. Grafted cation-exchange membranes (GCM) were obtained by radiation graft post-polymerization of styrene onto UV-exposed PMP film followed by sulfonation with chlorosulfonic acid. The proton-conductivity of the GCM membrane with an ion-exchange capacity of 2.9 ± 0.1 meq/g reaches 21 ± 1 mS cm^?1 at room temperature and 95% relative humidity, which is twice higher the conductivity of the Nafion® under the same conditions. The GCM-1 H₂-permeability of 2.06?10^?7 cm² s^?1 even slightly lower than that of the Nafion® 212 (2.14?10^?7 cm² s^?1). A comparison of these membranes in the membrane electrode assemblies (MEA) of hydrogen-air fuel cells (FC) shows that the use of the grafted membranes with the high ion-exchange capacity is highly promising. The maximum performance of FC with grafted and Nafion® 212 membrane are both close to 180 mW/cm² at the current density of 400 mA/cm². At the same time, the high degree of crosslinking of sulfonated polystyrene leads to a decrease in conductivity and does not give an advantage in gas permeability.