The effects of fuel variability on the electrical performance and durability of a solid oxide fuel cell operating on biohythane

Biohythane is typically composed of 60/30/10 vol% CH₄/CO₂/H₂ and can be produced via two-stage anaerobic digestion of renewable and low carbon biomass with much greater efficiency compared with CH₄/CO₂ biogas. This work investigates the effects of fuel variability on the electrical performance and fuel processing of a commercially available anode supported solid oxide fuel cell (SOFC) operating on biohythane mixtures at 750 °C. Cell electrical performance was characterised using current-voltage curves and electrochemical impedance spectroscopy. Fuel processing was characterised using quadrupole mass spectroscopy. It is shown that when H₂/CO₂ is blended with CH₄ to make biohythane, the SOFC efficiency is significantly increased, high SOFC durability is achieved, and there are considerable savings in CH₄ consumption. Enhanced electrical performance was due to the additional presence of H₂ and promotion of CH₄ dry reforming, the reverse Boudouard and reverse water-gas shift reactions. These processes alleviated carbon deposition and promoted electrochemical oxidation of H₂ as the primary power production pathway. Substituting 50 vol% CH₄ with 25/75 vol% H₂/CO₂ was shown to increase cell power output by 81.6% at 0.8 V compared with pure CH₄. This corresponded to a 3.4-fold increase in the overall energy conversion efficiency and a 72% decrease in CH₄ consumption. A 260 h durability test demonstrated very high cell durability when operating on a typical 60/30/10 vol% CH₄/CO₂/H₂ biohythane mixture under high fuel utilisation due to inhibition of carbon deposition. Overall, this work suggests that decarbonising gas grids by substituting natural gas with renewably produced H₂/CO₂ mixtures (rather than pure H₂ derived from fossil fuels), and utilising in SOFC technology, gives considerable gains in energy conversion efficiency and carbon emissions savings.