PCB congeners and dechlorination in sediments of Lake Hartwell, South Carolina, determined from cores collected in 1987 and 1998

Four sediment cores were collected from Lake Hartwell, SC, in 1987 and 1998 and analyzed for polychlorinated biphenyl (PCB) congeners. Total PCBs ranged from -0 to 58 microg/ g. Positive matrix factorization (PMF) was applied to the data sets to determine PCB source profiles. Two factors were determined for each data set. One factor resembled the original estimated PCB mixture of 80% Aroclor 1016 and 20% Aroclor 1254 and the other factor was a dechlorinated version of the mixture. Evidence of a dechlorination plateau is apparent from the PMF loading solutions because the dechlorinated congener profiles do not change from 1987 to 1998, butthe contribution to the profile from the dechlorinated factor increases from 73% (1987) to 87% (1998). PMF source contributions and plots of PCB concentration versus congener for individual samples provide evidence of enhanced dechlorination at high concentrations. After source apportionment an anaerobic dechlorination model was applied to the dechlorinated source profiles to quantify possible dechlorination pathways. It was found that dechlorination process M, extended to target biphenyl rings with up to six chlorines, provided the best fit for an individual process, and M + Q provides the best fit for combined processes, although M + LP also provides a similarfit. Process LP targets the higher chlorinated congeners and appears to dechlorinate PCBs in the sediments initially.