| 注塑机压力参数的设定 |
| |
| 引用本文： | 王松杰,郑国强,申长雨.注塑机压力参数的设定[J].工程塑料应用,2004,32(1):56-58. |
| |
| 作者姓名： | 王松杰 郑国强 申长雨 |
| |
| 作者单位： | 郑州大学橡塑模具国家工程研究中心,郑州,450002;郑州大学橡塑模具国家工程研究中心,郑州,450002;郑州大学橡塑模具国家工程研究中心,郑州,450002 |
| |
| 摘 要： | 概述了影响注塑机螺杆背压、注塑压力、保压压力和锁模力的重要因素及其设定方法。为正确设定注塑机的控制参数并找出最佳的工艺条件提供参考，对生产具有实际指导意义。在最佳工艺条件下可使注射周期和成品件重处于一个较稳定的水平。
|
| 关 键 词： | 塑料 注塑机 调校 压力参数 设定 |
| 修稿时间： | 2003年9月26日 |
SETTING OF THE PRESSURE PARAMETERS FOR THE INJECTION MACHINE |
| |
| Wang Songjie,Zheng Guoqiang,Shen Changyu.SETTING OF THE PRESSURE PARAMETERS FOR THE INJECTION MACHINE[J].Engineering Plastics Application,2004,32(1):56-58. |
| |
| Authors: | Wang Songjie Zheng Guoqiang Shen Changyu |
| |
| Abstract: | The important factors influencing the screw backpressure, injection pressure, packing pressure and mold clamping force as well as their setting means are presented. The reference for the optimum technical conditions is provided in order to set correctly the controlling parameters of the injection machine, having the practical instruction significance for the production. At last, the injection cycle and product weight will be in a stable situation as long as product is processed under the optimum technical conditions. |
| |
| Keywords: | plastic injection molding machine adjusting pressure parameter getting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
