| 三层复合铝箔的有限元分析 |
| |
| 引用本文： | 江桂芝,钱健清. 三层复合铝箔的有限元分析[J]. 有色金属材料与工程, 2009, 30(1): 16-18 |
| |
| 作者姓名： | 江桂芝 钱健清 |
| |
| 作者单位： | 安徽工业大学,材料科学与工程学院,安徽,马鞍山,243002 |
| |
| 摘 要： | 用MSC SuperForm软件对三层复合铝箔的轧制过程进行了有限元模型,得到了轧件的包覆板横向厚度分布特征。研究了压下量对横向厚度分布的影响,结果表明,通过改变压下量的大小,可以有效改善轧件的包覆板横向厚度分布不均的现象。
|
| 关 键 词： | 复合铝箔 有限元模型 压下量 包覆板厚度 轧制 |
Finite Element Analysis of Sandwiched Aluminum Sheets |
| |
| JIANG Gui-zhi,QIAN Jian-qing. Finite Element Analysis of Sandwiched Aluminum Sheets[J]. Nonferrous Metal Materials and Engineering, 2009, 30(1): 16-18 |
| |
| Authors: | JIANG Gui-zhi QIAN Jian-qing |
| |
| Affiliation: | JIANG Gui-zhi, QIAN Jian-qina ( SChool of Material Science ＆ Engineering, Anhui University of Technology, Ma ＇anshan 243002, China) |
| |
| Abstract: | The model of the sandwiched aluminum sheets was built by finite element analysis software MSC SuperForm. From the simulation, the distribution of the thicknesses of the component layers was obtained in the traverse direction. The influence of the reduction on the thicknesses of the component layers was effectively improved by the change of reduction. |
| |
| Keywords: | composite aluminum foil finite element model reduction thicknesses of component layers roiling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
