| 埋弧焊管弯曲试验开裂原因分析 |
| |
| 引用本文： | 张晓强.埋弧焊管弯曲试验开裂原因分析[J].焊管,2010,33(6):58-59. |
| |
| 作者姓名： | 张晓强 |
| |
| 作者单位： | （中国石化集团江汉石油管理局沙市钢管厂，湖北 荆州 434001） |
| |
| 摘 要： | 对埋弧焊管检验中出现的正弯和反弯不合格试样进行了金相分析，发现这些不合格试样均在焊缝焊趾处存在微裂纹或微咬边，这是导致弯曲开裂的主要原因。产生微裂纹的原因是焊缝与母材过渡不平滑，焊趾处应力集中过大，再加上矫平试样时未去除焊缝余高；产生微咬边的原因是焊接过程中焊接规范不恰当或焊接过程设备运行不稳定。
|
| 关 键 词： | 埋弧焊管 正弯 反弯 微裂纹 微咬边 |
Cracking Reason Analysis on SAWH Pipe Bend Test |
| |
| ZHANG Xiao-qiang.Cracking Reason Analysis on SAWH Pipe Bend Test[J].Welded Pipe and Tube,2010,33(6):58-59. |
| |
| Authors: | ZHANG Xiao-qiang |
| |
| Affiliation: | (Shashi Steel Pipe Works Jianghan Petroleum Administration Bureau,Jingzhou 434001，hubei，China) |
| |
| Abstract: | Metallographic test analysis was carried out for unqualified face bend and reverse bend samples during submerged arc welded pipe production,the results indicated that the main reason caused bending cracking is micro-crack or micro-undercut existd at the weld toe.The reason caused micro-crack is weld and base metal transition is not smooth,stress concentration is too large at weld toe,and during leveling of specimen does not remove weld reinforcement.Welding specification is not appropriate or welding equipments are not stable during welding process caused mocro-undercut. |
| |
| Keywords: | submerged arc welded pipe face bend reverse bend micro-crack micro-undercut |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊管》浏览原始摘要信息 |
|
点击此处可从《焊管》下载全文 |
