| 薄壁大直径不锈钢筒体的焊接工艺设计 |
| |
| 引用本文： | 王洪艳. 薄壁大直径不锈钢筒体的焊接工艺设计[J]. 煤矿机械, 2011, 32(3): 124-125 |
| |
| 作者姓名： | 王洪艳 |
| |
| 作者单位： | 辽宁地质工程职业学院,辽宁,丹东,118008 |
| |
| 摘 要： | 主要谈谈0Cr18Ni9不锈钢作为永磁筒式磁选机设备的主要结构件筒体时的焊接工艺。该筒体为一薄壁不锈钢组焊件,由2块尺寸相同、厚度为4 mm的矩形不锈钢钢板分别卷制成筒形后,再整体成形为直径为1 050 mm的大直径筒体。
|
| 关 键 词： | 不锈钢大直径筒体 0Cr18Ni9 焊接 |
Welding Procedure for Thin Stainless Cylinder with Major Diameter |
| |
| WANG Hong-yan. Welding Procedure for Thin Stainless Cylinder with Major Diameter[J]. Coal Mine Machinery, 2011, 32(3): 124-125 |
| |
| Authors: | WANG Hong-yan |
| |
| Affiliation: | WANG Hong-yan(Liaoning Geological Project Professional College,Dandong 118008,China) |
| |
| Abstract: | Mainly to talk about the welding process of 0Cr18Ni9 as a main structure of the magnetic separator equipment.The cylinder is a discreteness of the thin stainless,build up with the same size and thickness of 4mm.Firstly,roll into the rectangular plate respectively,and then make them into the cylinder with overall shape for the 1 050 mm in diameter. |
| |
| Keywords: | 0Cr18Ni9 |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
