| 电子机械制动汽车稳定性控制电控单元软件开发及硬件在环试验 |
| |
| 引用本文： | 李静,张建,杨坤,王坤,魏青,吴振昕.电子机械制动汽车稳定性控制电控单元软件开发及硬件在环试验[J].吉林大学学报(工学版),2011(4):893-897. |
| |
| 作者姓名： | 李静 张建 杨坤 王坤 魏青 吴振昕 |
| |
| 作者单位： | 吉林大学汽车工程学院;中国第一汽车集团技术中心;中国汽车技术研究中心; |
| |
| 基金项目： | 国家自然科学基金项目(50805063); 吉林大学基本科研业务费专项项目(421032512415,200903238); 新世纪优秀人才支持计划项目(NCET-09-0421) |
| |
| 摘 要： | 针对电子机械制动(EMB)汽车,基于目标电控单元进行了汽车稳定性控制系统(VSC)的软件开发。首先分析了软件功能,搭建了开发架构和软件流程图,然后采用C语言手写代码的方式进行程序的编写,并构建了基于XPC Target技术和CAN网络的硬件在环测试平台。最后通过硬件在环试验验证了汽车稳定性控制(VSC)电控单元与EMB系统的匹配性能及VSC系统的控制效果。
|
| 关 键 词： | 车辆工程 电子机械制动 汽车稳定性控制 电控单元软件 硬件在环 |
Development of ECU software and hardware-in-the-loop simulation for stability control of vehicle with electro-mechanical brake |
| |
| LI Jing,ZHANG Jian,YANG Kun,WANG Kun,WEI Qing,WU Zhen-xin.Development of ECU software and hardware-in-the-loop simulation for stability control of vehicle with electro-mechanical brake[J].Journal of Jilin University:Eng and Technol Ed,2011(4):893-897. |
| |
| Authors: | LI Jing ZHANG Jian YANG Kun WANG Kun WEI Qing WU Zhen-xin |
| |
| Affiliation: | LI Jing1,ZHANG Jian1,YANG Kun2,WANG Kun3,WEI Qing1,WU Zhen-xin2(1.College of Automotive Engineering,Jilin University,Changchun 130022,China,2.China FAW Group Corporation R&D Center,Changchun 130011,3.China Automotive Technology and Research Center,Tianjin 300162,China) |
| |
| Abstract: | A software of the vehicle stability control(VSC) system was developed based on the target ECU for the vehicle with the electro-magnetic brake(EMB).The functions of the software were analyzed,development frame and software flowchart were established.A program was compiled by means of the handwritten code of C programming language.A hardware-in-the-loop simulation platform was built based on XPC Target and CAN network.The matching performance of VSC ECU and EMB system and the control effectiveness of VSC syst... |
| |
| Keywords: | vehicle engineering electromechanical brake(EMB) vehicle stability control(VSC) ECU software hardware-in-the-loop |
| 本文献已被 CNKI 等数据库收录！ |
|
