P(AM-DBC)的制备及其絮凝性能研究

针对难处理的含油污水,以丙烯酰胺(AM)和丙烯酰氧乙基二甲基苄基氯化铵(DBC)为单体,通过反相微乳液聚合方法合成了疏水缔合型阳离子聚合物P(AM-DBC),并进行红外光谱表征。考察了单体质量比、引发剂用量、反应温度、反应时间对P(AM-DBC)分子质量和转化率的影响,并将P(AM-DBC)应用于辽河油田含油污水的絮凝实验,结果表明P(AM-DBC)阳离子度约为9%、相对分子质量为400万左右时絮凝效果最佳,投加量为20 mg/L时除油率达到97%,浊度去除率为95%。

Study on the preparation of P(AM-DBC) and its flocculating capacity

Aiming at the refractory oil-bearing wastewater,hydrophobic associative cationic polymer polyacrylamide P (AM-DBC) has been synthesized by reverse microemulsion polymerization method,using acrylamide (AM) and N,N-dimethyl-N-acryloyloxyethyl-N-benzyl ammonium chloride (DBC) as cationic monomers,and character-ized by infra-red spectrometry. The influences of conditions,such as monomer mass ratio,initiator dosage re-action temperature,reaction time on the molecular mass and conversion rate of P (AM-DBC) are investigated. P(AM-DBC) is applied to the flocculation experiments for oil-bearing wastewater treatment in Liaohe Oilfield. The results show that when the cationicity of P(AM-DBC) is about 9%and relative molecular mass around 4 million,the flocculating effect is the best. When the dosage is 20 mg/L,the oil removing rate reaches 97%,and turbidity removing rate is 95%.