首页 | 本学科首页   官方微博 | 高级检索  
     

水性油墨废水混凝工艺的优化研究
引用本文:夏明辉,吴其华,郭建林.水性油墨废水混凝工艺的优化研究[J].广州化工,2012,40(17):63-65.
作者姓名:夏明辉  吴其华  郭建林
作者单位:1. 湖北理工学院环境科学与工程学院,湖北黄石435003 矿区环境污染控制与修复湖北省重点实验室,湖北黄石435003
2. 湖北省建筑设计院,湖北武汉,430071
摘    要:采用混凝法对水性油墨废水进行处理,探讨了混凝剂种类及投加量、混凝最佳pH值、助凝剂种类及投加量等因素对混凝效果的影响。结果表明,当混凝剂硫酸亚铁投加量为200 mg/L,助凝剂聚丙烯酰胺投加量为2.5 mg/L,pH值为5,沉降时间为40 min时,处理后的废水色度去除率达97%以上,COD去除率达92%以上。

关 键 词:硫酸亚铁  聚丙烯酰胺  水性油墨废水  混凝

Study on Optimization of Coagulation Process of Water -based Ink Wastewater
XIA Ming-hui,WU Qi-hua,GUO Jian-lin.Study on Optimization of Coagulation Process of Water -based Ink Wastewater[J].GuangZhou Chemical Industry and Technology,2012,40(17):63-65.
Authors:XIA Ming-hui  WU Qi-hua  GUO Jian-lin
Affiliation:XIA Ming - hui, WU Qi - hua, GUO Jian - lin ( 1 School of Environmental Science and Engineering College, Hubei Polytechnic University, Hubei Huangshi 435003 ; 2 Hubei Provincial Key Laboratory of Mining Area Environmental Pollution Control and Remediation, Hubei Huangshi 435003; 3 Hubei Architectural Design Institute, Hubei Wuhan 430071, China)
Abstract:Coagulation process was used to treat water -based ink wastewater. The coagulation effects of the types and dosage of coagulants, the pH value, and the types and dosage of coagulation aid were investigated. The results indicated that when wastewater's pH value was 5, the dosage of FeSO4 was 200 mg/L, the dosage of PAM was 2.5 mg/L, and sedimentation time was 40 min, and the color and COD removals can reach 97% and 92%, respectively.
Keywords:FeSO4  PAM  water- based ink wastewater  coagulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号