Etching of As- and P-based III–V semiconductors in a planar inductively coupled BCl3/Ar plasma

A parametric study of the etch characteristics of Ga-based (GaAs, GaSb, and AlGaAs) and In-based (InGaP, InP, InAs, and InGaAsP) compound semiconductors in BCl₃/Ar planar inductively coupled plasmas (ICPs) was performed. The Ga-based materials etched at significantly higher rates, as expected from the higher volatilities of the As, Ga, and Al trichloride, etch products relative to InCl₃. The ratio of BCl₃ to Ar proved critical in determining the anisotropy of the etching for GaAs and AlGaAs, through its effect on sidewall passivation. The etched features in In-based materials tended to have sloped sidewalls and much rougher surfaces than for GaAs and AlGaAs. The etched surfaces of both AlGaAs and GaAs have comparable root-mean-square (RMS) roughness and similar stoichiometry to their unetched control samples, while the surfaces of In-based materials are degraded by the etching. The practical effect of the Ar addition is found to be the ability to operate the ICP source over a broader range of pressures and to still maintain acceptable etch rates.