首页 | 本学科首页   官方微博 | 高级检索  
     

利用氮化铬铁合金生产高氮无镍奥氏体不锈钢的研究
引用本文:刘继冰,郭军,季长涛,刘云旭.利用氮化铬铁合金生产高氮无镍奥氏体不锈钢的研究[J].铁合金,2010,41(1):26-28.
作者姓名:刘继冰  郭军  季长涛  刘云旭
作者单位:1. 长春工业大学,长春,中国,130012
2. 中钢集团吉林铁合金股份有限公司,吉林,中国,132002
摘    要:为在常压下能够生产出高氮无镍奥氏体不锈钢,选用了氮化铬铁合金作氮源,通过破碎、熔化微碳纯铁、加入锰合金及氮化铬铁合金颗粒,控制浇注时间和温度,以保证钢中有足够高的氮含量,测试结果表明,熔炼钢经固溶处理,可获得稳定的高氮无镍奥氏体不锈钢。

关 键 词:氮化铬铁  高氮  无镍  奥氏体不锈钢  显微组织

RESEARCH ON THE PRODUCTION OF HIGH NITROGEN NICKEL-FREE AUSTENITIC STAINLESS STEEL WITH FERROCHROME NITRIDE
Liu Jibing,Guo Jun,Ji Changtao,Liu Yunxu.RESEARCH ON THE PRODUCTION OF HIGH NITROGEN NICKEL-FREE AUSTENITIC STAINLESS STEEL WITH FERROCHROME NITRIDE[J].Ferro-alloys,2010,41(1):26-28.
Authors:Liu Jibing  Guo Jun  Ji Changtao  Liu Yunxu
Affiliation:Liu Jibing~1 Guo Jun~2 Ji Changtao~1 Liu Yunxu~1 (1 Changchun University of Technology,Changchun 130012,China) (2 Sinosteel Jilin Ferroalloys Co.,Ltd.,Jilin 132002,China)
Abstract:To select ferrochrome nitride as nitrogen source to produce nickel-free austenitic stainless steel at normal pressure. By means of smelting nicro-carbon iron,adding manganese alloy and ferrochrome nitride grains curshed,and controlling the time and temperature of pouring to ensure enough nitrogen content in steel.The test results show that stable high nitrogen nickel-free austenitic stainless steel can be obtained after the melting steel goes through solution treatment.
Keywords:ferrochrome nitride  high nitrogen  nickel-free  austenitic stainless steel  microstructure  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号