| 造桥机底部框架结构满应力设计 |
| |
| 引用本文： | 吕永涛,刘小虎.造桥机底部框架结构满应力设计[J].华中科技大学学报(城市科学版),2006,23(Z2):86-88. |
| |
| 作者姓名： | 吕永涛 刘小虎 |
| |
| 作者单位： | 华中科技大学,土木工程与力学学院,湖北,武汉,430074 |
| |
| 摘 要： | 以构件截面面积为设计变量,在满应力齿行法过程中,以预测的截面积在构件数据库中按照面积匹配策略选取构件截面几何参数,按GB 50017-2003《钢结构设计规范》,施加强度和稳定性约束条件,对造桥机底部框架结构进行了满应力优化设计,并与传统满应力方法进行了对比,验证了方法的优越性.
|
| 关 键 词： | 结构优化 满应力 离散变量 造桥机 |
| 文章编号： | 1672-7037(2006)S2-0086-03 |
| 修稿时间： | 2006年10月10 |
Fully Stressed Design Method for Lower Frame Structures of a Bridge-making Machine |
| |
| LV Yong-tao,LIU Xiao-hu.Fully Stressed Design Method for Lower Frame Structures of a Bridge-making Machine[J].Journal of Huazhong University of Science and Technology,2006,23(Z2):86-88. |
| |
| Authors: | LV Yong-tao LIU Xiao-hu |
| |
| Abstract: | In the process of fully stressed zigzag method,taking structure cross section areas as design variables,the structure geometry parameters are selected from standard steel cross section database through cross section area matching method.At the same time,the intensity and stability constraints are considered by steel structure design GB 50017-2003 criterion.At last,an example of optimization of the lower frame structure of a bridge-making machine is given.By comparing the results of present method with that of conventional fully stressed design method,advantage of the former has been demonstrated. |
| |
| Keywords: | structure optimization fully stress discrete variables bridge-making machine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
