| 离合器外齿毂冷挤压成形工艺 |
| |
| 引用本文： | 刘左发,冯文杰,陈莹莹,周凤.离合器外齿毂冷挤压成形工艺[J].锻压技术,2020(1):103-108. |
| |
| 作者姓名： | 刘左发 冯文杰 陈莹莹 周凤 |
| |
| 作者单位： | 重庆理工大学机械工程学院;重庆理工大学汽车零部件先进制造技术教育部重点实验室;重庆理工大学车辆工程学院 |
| |
| 基金项目： | 重庆市科委资助项目(cstc2014yykfA60001);重庆市教委科学技术研究资助项目(KJ1400944) |
| |
| 摘 要： | 对某汽车离合器外齿毂的结构特征进行了分析,针对其内花键成形困难的技术难点,提出了冷挤压成形的工艺方案。通过有限元软件DEFORM-3D对离合器外齿毂冷挤压成形过程进行数值模拟分析,研究了入模半角、毛坯壁厚和摩擦系数对成形载荷及成形质量的影响规律。研究结果表明:当入模半角为45°、毛坯壁厚为6. 0 mm、摩擦系数为0. 12时,离合器外齿毂内花键圆角填充饱满,成形载荷也相对较小。并采用离合器外齿毂冷挤压成形工艺方案进行试验,证明了该工艺方案的可行性及数值模拟结果的正确性。
|
| 关 键 词： | 离合器外齿毂 内花键 冷挤压 数值模拟 成形质量 |
Cold extrusion process for clutch outer gear hub |
| |
| Liu Zuofa,Feng Wenjie,Chen Yingying,Zhou Feng.Cold extrusion process for clutch outer gear hub[J].Forging & Stamping Technology,2020(1):103-108. |
| |
| Authors: | Liu Zuofa Feng Wenjie Chen Yingying Zhou Feng |
| |
| Affiliation: | (College of Mechanical Engineering,Chongqing University of Technology,Chongqing 400054,China;Key Laboratory of Advanced Manufacturing Technology for Automobile Parts,Ministry of Education,Chongqing University of Technology,Chongqing 400054,China;Vehicle Engineering Institute,Chongqing University of Technology,Chongqing 400054,China) |
| |
| Abstract: | For the technical difficulties in the internal spline forming,the structural characteristics of the clutch outer gear hub of a certain automobile were analyzed,and the cold extrusion process scheme was proposed. Then,the cold extrusion process of the clutch outer gear hub was numerically simulated by finite element software DEFORM-3D,and the influences of half-angle of input die,wall thickness of blank and friction coefficient on the forming load and forming quality were studied. The results show that the rounded corner of internal spline in the clutch outer gear hub is full filled and the forming load is relatively small with the half angle of input die of 45°,the wall thickness of blank of 6. 0 mm and the friction coefficient of 0. 12. Furthermore,the experiment was conducted by the cold extrusion process of the clutch outer gear hub,and it proves the feasibility of the process scheme and the correctness of the numerical simulation results. |
| |
| Keywords: | clutch outer gear hub internal spline cold extrusion numerical simulation forming quality |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
