Oxy-CO2 reforming of methane to syngas over CoOx/MgO/SA-5205 catalyst

The oxy-CO₂ methane reforming reaction (OCRM) has been investigated over CoO_x supported on a MgO precoated highly macroporous silica–alumina catalyst carrier (SA-5205) at different reaction temperatures (700–900 °C), O₂/CH₄ ratios (0.3–0.45) and space velocites (20,000–100,000 cc/g/h). The reaction temperature had a profound influence on the OCRM performance over the CoO/MgO/SA-5205 catalyst; the methane conversion, CO₂ conversion and H₂ selectivity increased while the H₂/CO ratio decreased markedly with increasing reaction temperature. While the O₂/CH₄ ratio did not strongly affect the CH₄ and CO₂ conversion and H₂ selectivity, it had an intense influence on the H₂/CO ratio. The CH₄ and CO₂ conversion and the H₂ selectivity decreased while the H₂/CO increased with increasing space velocity. The O₂/CH₄ ratio and the reaction temperature could be used to manipulate the heat of the reaction for the OCRM process. Depending on the O₂/CH₄ ratio and temperature the OCRM process could be operated in a mildly exothermic, thermal neutral or mildly endothermic mode. The OCRM reaction became almost thermoneutral at an OCRM reaction temperature of 850 °C, O₂/CH₄ ratio of 0.45 and space velocity of 46,000 cc/g/h. The CH₄ conversion and H₂ selectivity over the CoO/MgO/SA-5205 catalyst corresponding to thermoneutral conditions were excellent: 95% and 97%, respectively with a H₂/CO ratio of 1.8.