| 螺旋埋弧焊管焊缝夹杂原因分析及解决措施 |
| |
| 引用本文： | 朱旭.螺旋埋弧焊管焊缝夹杂原因分析及解决措施[J].焊管,2007,30(1):72-73. |
| |
| 作者姓名： | 朱旭 |
| |
| 作者单位： | 胜利钢管有限公司,山东,淄博,255082 |
| |
| 摘 要： | 从焊接材料、成型合缝状态及焊接冶金等方面分析了螺旋埋弧焊管焊缝夹杂、气孔产生的原因,并提出通过改善成型质量、合理调整焊垫辊高度及焊剂送入位置等措施,解决了焊缝夹杂、气孔的产生,对实际生产有一定指导作用.
|
| 关 键 词： | 螺旋埋弧焊管 焊缝 焊缝夹杂 |
| 文章编号： | 1001-3938（2007）01-0072-02 |
| 修稿时间： | 2006-08-07 |
Causes Analysis for Slag in Weld of SSAW Pipe and Settlements |
| |
| ZHU Xu.Causes Analysis for Slag in Weld of SSAW Pipe and Settlements[J].Welded Pipe and Tube,2007,30(1):72-73. |
| |
| Authors: | ZHU Xu |
| |
| Abstract: | The article analyzes the causes for slag and air hole occurred from weld consumption,forming weld combining conditions and weld melt,also raises the its settlements to prevents slag and air hole occurred in weld by improving the forming quality,reasonable adjusting the height of welding mat rollers and adjusting wire feeding position.These settlements offer the good reference to production. |
| |
| Keywords: | SSAW pipe weld slag in weld |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
