| 基于三坐标的弧齿锥齿轮齿面误差测量与评定 |
| |
| 引用本文： | 赵华.基于三坐标的弧齿锥齿轮齿面误差测量与评定[J].机械传动,2011,35(5):20-23,26. |
| |
| 作者姓名： | 赵华 |
| |
| 作者单位： | 南阳理工学院,河南南阳,473004 |
| |
| 摘 要： | 根据弧齿锥齿轮的特点,给出一种基于三坐标测量的弧齿锥齿轮齿面误差测量与评定的方法.首先利用UG建立其三维实体模型,以此作为齿轮齿面误差检测与评定的理想要素;然后用三坐标测量机对实际齿面上的网格结点进行测量;再将三坐标测量机所采数据点导入到UG,利用实际齿面与理论齿面之间的偏差拟合出差曲面,以此反映弧齿锥齿轮的齿面误差....
|
| 关 键 词： | 弧齿锥齿轮 三坐标测量 差曲面 齿面误差 |
The Tooth Surface Error Measurement and Evaluation of Spiral Bevel Gear based on Three-coordinate Measurement |
| |
| Zhao Hua.The Tooth Surface Error Measurement and Evaluation of Spiral Bevel Gear based on Three-coordinate Measurement[J].Journal of Mechanical Transmission,2011,35(5):20-23,26. |
| |
| Authors: | Zhao Hua |
| |
| Affiliation: | Zhao Hua(Nanyang Institute of Technology,Nanyang 473004,China) |
| |
| Abstract: | A method of spiral bevel gear tooth surface error measurement and evaluation based on three-coordinate measurement is given according to the characteristics of spiral bevel gear.The 3D solid model building in UG is regarded as the gear ideal factor of measure and error evaluation;the grid nodes in the real gear tooth surface are measured by using three-coordinate measurement machine,and the collected data point is led into UG.The tooth surface error of spiral bevel gear is reflected by the difference surfac... |
| |
| Keywords: | Spiral bevel gear Three-coordinate measurement Difference surface Tooth surface error |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
