| 厚钢板激光弯曲成形机理的模拟研究 |
| |
| 引用本文： | 裴继斌,张立文,张全忠,王存山,董闯.厚钢板激光弯曲成形机理的模拟研究[J].材料工程,2006(Z1):180-182,185. |
| |
| 作者姓名： | 裴继斌 张立文 张全忠 王存山 董闯 |
| |
| 作者单位： | 大连理工大学,三束材料改性国家重点实验室,辽宁,大连,116024;大连理工大学,材料科学与工程学院,辽宁,大连,116024 |
| |
| 摘 要： | 对厚钢板的激光弯曲成形过程进行数值模拟.建立了钢板激光弯曲成形的三维非线性瞬态热力耦合有限元模型,模型中考虑了材料热物性参数和力学性能参数与温度的相关性.计算了钢板激光弯曲成形过程中的温度和应力,并预测了钢板的弯曲角度.模拟结果表明,厚度方向的温度梯度是导致钢板弯曲变形的主要原因.对数值模拟的结果进行了相应的实验,模拟结果与实验结果符合较好.
|
| 关 键 词： | 厚钢板 激光弯曲 数值模拟 有限元 |
| 文章编号： | 1001-4381(2006)Suppl-0180-03 |
Numerical Simulation of Mechanism in Laser Bending of Thick Steel Plate |
| |
| PEI Ji-bin,ZHANG Li-wen,ZHANG Quan-zhong,WANG Cun-shan,DONG Chuang.Numerical Simulation of Mechanism in Laser Bending of Thick Steel Plate[J].Journal of Materials Engineering,2006(Z1):180-182,185. |
| |
| Authors: | PEI Ji-bin ZHANG Li-wen ZHANG Quan-zhong WANG Cun-shan DONG Chuang |
| |
| Abstract: | Numerical simulation on laser bending of thick steel plate is presented.A three-dimensional FEM simulation has been performed that includes a non-linear transient coupled thermal-mechanical analysis accounting for the temperature dependency of the thermal and mechanical properties of the material.The proposed model is capable of calculating the temperature and stress as well as of predicting the final bending angle.Temperature gradient along the thickness is the main driving force for bending thick steel plate.Validation of numerical simulation was made experimentally.The comparison of the simulation results with experimental results has shown a good correlation. |
| |
| Keywords: | thick steel plate laser bending numerical simulation FEM |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
