| 基于MODBUS协议的镁熔液含氢量自动检测接口设计 |
| |
| 引用本文： | 翟健健,许四祥,李天甲.基于MODBUS协议的镁熔液含氢量自动检测接口设计[J].有色金属工程,2017,7(4). |
| |
| 作者姓名： | 翟健健 许四祥 李天甲 |
| |
| 作者单位： | 安徽工业大学机械工程学院,安徽工业大学机械工程学院,安徽工业大学机械工程学院 |
| |
| 基金项目： | 国家自然科学基金项目（面上项目，重点项目，重大项目） |
| |
| 摘 要： | 针对图像处理在工业现场检测镁熔液含氢量中的诸多问题,提出基于MODBUS协议的DSP与PLC的通信方案。方案以DM642为主站,S7-200为从站,设计了DSP与PLC通信的接口电路,并进行主站和从站的协议编程以及协议模块的调试。实验结果表明,通信方案稳定可靠,实时性好,为工业现场自动检测镁熔液含氢量奠定基础。
|
| 关 键 词： | 镁熔液 含氢量 MODBUS DM642 S7-200 |
| 收稿时间： | 2016/6/12 0:00:00 |
| 修稿时间： | 2017/7/18 0:00:00 |
Design of Interface for the Automatic Detection of Hydrogen Content in Magnesium Melt Based on MODBUS Protocol |
| |
| zhaijianjian,xusixiang and litianjia.Design of Interface for the Automatic Detection of Hydrogen Content in Magnesium Melt Based on MODBUS Protocol[J].Nonferrous Metals Engineering,2017,7(4). |
| |
| Authors: | zhaijianjian xusixiang and litianjia |
| |
| Abstract: | Aiming at many problems of image processing in industrial field for the measurement of hydrogen content in magnesium melt, a communication scheme between DSP and PLC based on MODBUS protocol is proposed. The scheme takes DM642 as the main station and S7-200 as the slave station. Except that, firstly, the interface circuit of DSP and PLC communication is designed. Then, the protocol programming of master station and slave station is completed. Finally, the protocol module debugging is solved. Experiment results show that the communication scheme is stable and has good real-time performance, and it provides a foundation for the automatic detection of the hydrogen content in magnesium melt. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《有色金属工程》浏览原始摘要信息 |
|
点击此处可从《有色金属工程》下载全文 |
|
