| JAF-40型射流气浮装置在热轧水处理中的应用 |
| |
| 引用本文： | 佟瑞宏,邓威.JAF-40型射流气浮装置在热轧水处理中的应用[J].辽东学院学报(自然科学版),2009,16(2). |
| |
| 作者姓名： | 佟瑞宏 邓威 |
| |
| 作者单位： | 1. 辽东学院,辽宁,丹东,118003
2. 丹东北方环保工程有限公司,辽宁,丹东,118003 |
| |
| 摘 要： | 京唐钢铁联合有限责任公司2 250 mm热轧工程轧机冷却、冲氧化铁皮废水经过旋流井沉淀除浮油而无法去除乳化油,其含油50~100 mg/L,造成过滤器内滤料堵塞、板结。为此设计JAF-40型射流气浮装置去除其乳化油,达到最终出水含油小于10 mg/L的水质条件,经过滤器过滤后,较好地满足了废水循环回用的要求。根据现场的实际情况反馈,对该设备进行了一些改进,使设备实现了完全自动化控制。结果表明:设备操作方便,运行稳定,除油效果好。
|
| 关 键 词： | 射流气浮 除油技术 热轧冷却水 |
Application of JAF-40 Type Fluidics Air Floating Device to Hot Rolling Water Treatment |
| |
| TONG Rui-hong,DENG Wei.Application of JAF-40 Type Fluidics Air Floating Device to Hot Rolling Water Treatment[J].Journal of Liaodong University：Natural Sciences,2009,16(2). |
| |
| Authors: | TONG Rui-hong DENG Wei |
| |
| Affiliation: | TONG Rui-hong1,DENG Wei2 (1.College of Mechanical , Electronic Engineering,Eastern Liaoning University,D,ong 118003,China,2.D,ong North Environmental Protection Co.,Ltd.,China) |
| |
| Abstract: | Though waste water produced in the process of cooling and removing oxide scale of Jingtang Iron and Steel Company 2250mm hot rolling mill was treated with precipitation and curettage oil in the swirl wells,its emulsified oil could not be removed.Its oil content was 50-100mg /L,which could cause the filter material within the filter to be clogged and hardened.To solve this problem,a JAF-40 type fluidics air floating device was designed to remove the emulsified oil.The test results showed that oily water was ... |
| |
| Keywords: | fluidics air floating oil-removing technology waste water in cooling process of hot rolling mill |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
