Development of polyethersulfone phase‐inversion membranes for membrane distillation using oleophobic coatings |
| |
Authors: | L Eykens K De Sitter L Stoops C Dotremont L Pinoy B Van der Bruggen |
| |
Affiliation: | 1. VITO—Flemish Institute for Technological Research, Mol, Belgium;2. Department of Chemical Engineering, KU Leuven, Leuven, Belgium;3. Department of Chemical Engineering, Cluster Sustainable Chemical Process Technology, KU Leuven, Ghent, Belgium;4. Faculty of Engineering and the Built Environment, Tshwane University of Technology, Pretoria, South Africa |
| |
Abstract: | Highly porous macrovoid‐free polyethersulfone membranes have been prepared using the phase‐inversion process with water as the non‐solvent. These membranes are of great interest for membrane distillation (MD) after application of a hydrophobic/oleophobic coating. The membrane structure was controlled by optimizing the process conditions and dope composition. Counter intuitively, increasing the polymer concentration favors the formation of larger surface pores under similar process conditions. A symmetric membrane is obtained when a sufficient amount of high‐molecular‐weight polyvinylpyrrolidone was added to the dope solution, which appears to play an important role in the structure formation process. The final membrane shows similar performance compared to commercial MD membranes. However, the membranes developed in this study show an oleophobic character, broadening the applications of MD. Moreover, the compressibility of these membranes is severely reduced compared to stretched membranes, which is expected to result in an improved MD performance at full scale. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45516. |
| |
Keywords: | direct contact membrane distillation (DCMD) hydrophobicity membranes morphology porous materials |
|
|