|
|||||
|
|
| STEP7模拟调试及实现与WinCC连接的仿真 | |
| 引用本文： | 余丹,于建顺. STEP7模拟调试及实现与WinCC连接的仿真[J]. 现代电子技术, 2010, 33(14): 81-83 |
| 作者姓名： | 余丹 于建顺 |
| 作者单位： | 华东交通大学,电气与电子工程学院,江西,南昌,330013 |
| 摘 要： | 为了在没有实际硬件PLC的情况下,减少调试成本及风险,实现程序调试,检验程序正确性,使用了STEP 7中的仿真软件PLCSIM。并且通过在STEP 7中建立OS站,实现了西门子编程软件STEP 7与西门子组态软件WinCC的连接,从而可在WinCC界面中直接监控现场设备,增强可视性,缩短监控系统的开发时间。通过测试一个运行时间的简单程序,实现了在PLCSIM中的调试和在WinCC界面中的监控,并用实际硬件进行了验证。 |
| 关 键 词： | STEP7 PLCSIM WinCC 监控系统 |
Simulation Debugging of STEP 7 and Simulation of Implementing Connection with WinCC |
|
| YU Dan,YU Jian-shun. Simulation Debugging of STEP 7 and Simulation of Implementing Connection with WinCC[J]. Modern Electronic Technique, 2010, 33(14): 81-83 | |
| Authors: | YU Dan YU Jian-shun |
| Affiliation: | (School of Electrical and Electronic Engineering, East China Jiaotong University, Nanchang 330013, China) |
| Abstract: | The simulation software PLCSIM in STEP 7 is adopted to reduce debugging cost, achieve program debugging and test program correctness while there is no actual hardware. The connection of Siemens programming software STEP 7 with Siemens configuration software WinCC was achieved by creating OS stations in STEP 7. In this way, the direct monito- ring of site equipments can be realized in WinCC interface, the visibility can be improved and the development time of the mo- nitoring system can be reduced. The debugging in PLCSIM and the monitoring in WinCC interface were achieved by testing a simple program of running time. The actual hardware was validated. |
| Keywords: | STEP7 PLCSIM WinCC |
| 本文献已被 维普 万方数据 等数据库收录！ | |