| 过氧化物交联低密度聚乙烯电缆料质量改进 |
| |
| 引用本文： | 赵爱利,竺佩琦,杨令衡,杨大伟.过氧化物交联低密度聚乙烯电缆料质量改进[J].石化技术与应用,2010,28(6):520-523. |
| |
| 作者姓名： | 赵爱利 竺佩琦 杨令衡 杨大伟 |
| |
| 作者单位： | [1]中国石油兰州石化公司乙烯厂,甘肃兰州730060 [2]中国石油兰州石化公司石油化工厂,甘肃兰州730060 |
| |
| 摘 要： | 以丙烯替代丙醛作为相对分子质量调节剂,优化各反应器的温度,在反应压力为260 MPa,驰放气量为700 kg/h的条件下,可生产10 kV电缆专用料低密度聚乙烯(LDPE)2210 H产品。结果表明,产品熔体流动指数为0.20 g/m in,密度由0.921 5 g/cm3降至0.920 1 g/cm3,介电损耗正切由2.7×10-4降至1.6×10-4,维卡软化点由89.9℃升至92.1℃。产品性能得到改善。
|
| 关 键 词： | 低密度聚乙烯 电缆专用料 熔体流动指数 密度 杂质 调节剂 介电损耗角正切 |
Quality improvement for peroxide cross-linked low density polyethylene cable speciality |
| |
| Zhao Aili,Zhu Peiqi,Yang Lingheng,Yang Dawei.Quality improvement for peroxide cross-linked low density polyethylene cable speciality[J].Petrochemical Technology & Application,2010,28(6):520-523. |
| |
| Authors: | Zhao Aili Zhu Peiqi Yang Lingheng Yang Dawei |
| |
| Affiliation: | 1. Polyolefin Plant of Lanzhou Petrochemical Company, PetroChina, Lanzhou 730060, China ; 2. Petrochemical Plant of Lanzhou Petrochemical Company, PetroChina, Lanzhou 730060, China) |
| |
| Abstract: | 10 kV cable speciality low density polyethylene 2210 H was produced with propylene instead of propanal as relative molecular mass regulator, optimizing the temperature of each reactor and at the reaction pressure 260 MPa, flow rate of purge gas 700 kg/h. The results showed that the melt flow index of product was 0.20 g/min, density decreased from 0. 921 5 g/cm3 to 0. 920 1 g/cm3 , dielectric loss angle tangent value decreased from 2.7 × 10-4 to 1.6× 10-4, Vicat softening point increased from 89.9℃ to 92.1 ℃. The performance of product was improved. |
| |
| Keywords: | low density polyethylene cable speciality melt flow index density impurity regulator dielectric loss angle tangent |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
