| 基于选择不同暂态阻抗的分布式电源接入容量分析 |
| |
| 引用本文： | 盛方正,傅晓飞,陈之琛.基于选择不同暂态阻抗的分布式电源接入容量分析[J].浙江电力,2012(9):5-9. |
| |
| 作者姓名： | 盛方正 傅晓飞 陈之琛 |
| |
| 作者单位： | 上海市电力公司 |
| |
| 摘 要： | 含分布式电源（DG）的配电网在发生短路故障时,DG注入的电流可能会导致过电流保护误动,因此需要根据电流保护分析DG的准入容量问题。首先分析各个故障点对电流Ⅰ,Ⅱ,Ⅲ段保护可能产生的影响,提出了基于选择不同DG暂态阻抗的计算最大接入容量的方法。对于电流保护Ⅰ段采用分布式电源的次暂态阻抗,对于电流保护Ⅱ段和Ⅲ段则采用分布式电源的暂态阻抗,得出了DG最大容量的约束条件,最后通过仿真说明了该方法既符合DG实际的暂态过程,又能在满足现有电流保护不误动的条件下得到DG的最大容量。
|
| 关 键 词： | 暂态阻抗 分布式电源 电流保护 |
Analysis on Distribution Generation Integration Capacity Based on Selection of Different Transient Impedances |
| |
| SHENG Fang-zheng,FU Xiao-fei,CHEN Zhi-chen.Analysis on Distribution Generation Integration Capacity Based on Selection of Different Transient Impedances[J].Zhejiang Electric Power,2012(9):5-9. |
| |
| Authors: | SHENG Fang-zheng FU Xiao-fei CHEN Zhi-chen |
| |
| Affiliation: | (Shanghai Municipal Electric Power Company,Shanghai 200122,China) |
| |
| Abstract: | When the short circuit fault occurs in the distribution network with distributed generation(DG) connected,the DG injection current may cause misoperation of overcurrent protection.Therefore,the DG integration capacity needs to be analyzed on the basis of current protection.Firstly,the impact of each failure on current protection section Ⅰ,Ⅱ and Ⅲ are analyzed and the method of computing the maximum integration capacity based on selection of different transient impedances of DG is proposed.The DG sub-transient impedance is used to analyze the influence on protection section Ⅰ and the transient impedance is used to analyze that on section Ⅱ and Ⅲ.The constraints on the maximum capacity of DG have been obtained.The simulation results show that the method is consistent with the actual transient process of DG and can help obtain the maximum capacity of DG without misoperation of the existing current protection. |
| |
| Keywords: | transient impedance distributed generation current protection |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
