EFFECT OF DISTRIBUTOR ON BUBBLE SIZE AND BUBBLE RISE VELOCITY IN THE SLUGGING REGIME OF A SEMI-CYLINDRICAL GAS-SOLID FLUIDIZED BED† |
| |
Authors: | Yasuo Hatate Yoshimitsu Uemura Mitsunobu Migita Yoshinobu Kawano Yasuhiko Tanaka Kazuya Ijichi DF King |
| |
Affiliation: |
a Department of Chemical Engineering, Kagoshima University, Kagoshima, Japan |
| |
Abstract: | A semi-cylindrical fluidized bed of 15?cm internal diameter, equipped with a transparent flat glass plate for the front wall, was employed to visually observe bubbles in the bubbling to slugging transition regime and in the slugging regime. Five kinds of perforated distributors were used to investigate the effect of distributor type on the bubble size and the bubble rise velocity. The average bubble size was not affected by distributor type in these flow regimes, and could be predicted by Darton et al's correlation (1974)of hole number 22. In other words, this comes from the inapplicability of the correlation to the slugging regime. The bubble rise velocity agreed well with Allahwala et al's correlation (1979) and was not affected by the type of distributor. |
| |
Keywords: | Bubble Size Bubble Rise Velocity Slugging Gas-Solid Fluidized Bed |
本文献已被 InformaWorld 等数据库收录! |