| U盘盖注射模具设计 |
| |
| 引用本文： | 魏香林. U盘盖注射模具设计[J]. 机械工程师, 2012, 0(8): 41-42 |
| |
| 作者姓名： | 魏香林 |
| |
| 作者单位： | 广东省工业贸易职业技术学校,广东佛山528237 |
| |
| 摘 要： | 以Pro/E Mold Design模块为主要工具,通过对U盘的工艺性和结构性进行分析,介绍了U盘在注射模具设计中的考虑因素,以及型芯、型腔在Pro/E Mold Design模块中的快速成型方法。
|
| 关 键 词： | Pro/E 分型面 注射模 工作原理 |
Design of Injection Mold for the Display Panel |
| |
| WEI Xiang-lin. Design of Injection Mold for the Display Panel[J]. Mechanical Engineer, 2012, 0(8): 41-42 |
| |
| Authors: | WEI Xiang-lin |
| |
| Affiliation: | WEI Xiang-lin (Guangdong Industrial Trade Vocational School, Foshan 528237, China ) |
| |
| Abstract: | Taking Pro/E Mold Design as main tool, the paper analyzed the structure and molding process, and stated the considered factor in designing injection mold for the u-disk. The rapidly generating method of the coreand cavity of injection mold is introduced based on Pro/E Mold Design modular. |
| |
| Keywords: | Pro/E parting injection working principle |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
