|
|||||
|
|
| 残余应力对焊接接头CTOD设计曲线的影响 | |
| 引用本文： | 吕涛,赵海燕,史耀武. 残余应力对焊接接头CTOD设计曲线的影响[J]. 中国机械工程, 2002, 13(5): 437-441 |
| 作者姓名： | 吕涛 赵海燕 史耀武 |
| 作者单位： | 1. 北京石油化工学院,北京市,102600 2. 清华大学,北京市,100084 3. 北京工业大学,北京市,100022 |
| 基金项目： | 国家自然科学基金资助项目 (5 9475 0 65 ) |
| 摘 要： | 基于BISPD6493：1991初级评定，采用热弹塑性有限元分析方法，研究了残余应力和强度组配对横向裂纹平板对接接头CTOD设计曲线的影响规律。结果表明，强度组配和残余力对CTOD设计曲线具有明显的影响；残余应力对接头中的短裂纹影响较大，PD6493：1991初级评定不适用于接头中含有位于拉伸残余应力区内的短裂纹情形，随着裂纹尺寸的增大，残余应力的影响逐渐减弱；在应用PD6493：1991初级评定曲线对接头中的大裂纹情形进行评价时，将得出偏于保守的结果。 |
| 关 键 词： | 残余应力 焊接接头 CTOD设计曲线 横向裂纹 强度组配 裂纹尖端张开位移 |
| 文章编号： | 1004-132X(2002)05-0437-05 |
Influence of Welding Residual Stress on the CTOD Design Curve |
|
| LU Tao. Influence of Welding Residual Stress on the CTOD Design Curve[J]. China Mechanical Engineering, 2002, 13(5): 437-441 | |
| Authors: | LU Tao |
| Abstract: | According to the PD6493: 1991 level 1 approach, the influence of welding residual stress on the CTOD design curve in welded joints with central transverse cracks is studied by a thermal elasto-plastic finite element method. The results indicate that the shapes and positions of the CTOD design curve are greatly affected by the welding residual stress and the strength mis-matching. The approach is not sufficient for small cracks lying fully in the tensile residual stress region. The residual stress effect is reduced as the crack grows longer, and the recommended CTOD design curve becomes more conservative as the crack grows longer. |
| Keywords: | CTOD design curve transverse crack welded joints residual stress strength mis-matching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |