| UG规律曲线函数在活塞精确建模中的应用 |
| |
| 引用本文： | 曹杰.UG规律曲线函数在活塞精确建模中的应用[J].柴油机,2012,34(6):24-25, 56. |
| |
| 作者姓名： | 曹杰 |
| |
| 作者单位： | 东风活塞轴瓦有限公司,湖北十堰442003 |
| |
| 摘 要： | 利用UG软件的规律曲线函数对活塞进行精确建模,在软件中形成活塞裙部的三维等高线图;分析活塞裙面的微观形态,进而对外圆型线进行优化;并对活塞的接触模式进行初步判断。从而优化活塞设计。
|
| 关 键 词： | UG软件 活塞 建模 优化设计 |
| 收稿时间： | 2012/1/4 0:00:00 |
The Usage of the Rule Curve of UG Software in Piston Precise Modeling |
| |
| Cao Jie.The Usage of the Rule Curve of UG Software in Piston Precise Modeling[J].Diesel Engine,2012,34(6):24-25, 56. |
| |
| Authors: | Cao Jie |
| |
| Affiliation: | Cao Jie ( Dongfeng Piston＆Bearing Co. , Ltd. , Hubei Shiyan 442003) |
| |
| Abstract: | The rule curve of UG software was applied to build the precise modeling of the piston, and the 3D contour map was thus created. The micro-shape of the piston skirt was analyzed, the piston profile was optimized, and the contact mode of the piston was judged initially, which can help to improve the piston design. |
| |
| Keywords: | UG software piston modeling optimization design |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《柴油机》浏览原始摘要信息 |
|
点击此处可从《柴油机》下载全文 |
|
