| 矩形钢制常压水池的结构分析与设计 |
| |
| 引用本文： | 罗佑新,李晓润,吴昌栋,杨春峰,卞晓芳.矩形钢制常压水池的结构分析与设计[J].钢结构,2011,26(3):29-32. |
| |
| 作者姓名： | 罗佑新 李晓润 吴昌栋 杨春峰 卞晓芳 |
| |
| 作者单位： | 中冶建筑研究总院有限公司; |
| |
| 摘 要： | 矩形钢制水池越来越多地应用于环保工程.一般矩形常压水池壁板及底板采用平板结构形式,抗弯承载力和整体刚度较差.结合某地上200 m3.常压水处理池钢结构的设计,在壁板设计中提出加劲板、竖向柱、横向圈、连杆的整体组合加固方式,并与顶边加固方法及垂直、横向联合加固方法进行对比.结果表明:采用整体组合加固形式的池体结构整体刚度...
|
| 关 键 词： | 钢制焊接 矩形水池 整体组合加固 锥形底板 有限元模型 |
ANALYSIS AND DESIGN OF RECTANGULAR STEEL WELDED ATMOSPHERIC PRESSURE POOL |
| |
| Luo Youxin,Li Xiaorun,Wu Changdong,Yang Chunfeng,Bian Xiaofang.ANALYSIS AND DESIGN OF RECTANGULAR STEEL WELDED ATMOSPHERIC PRESSURE POOL[J].Steel Construction,2011,26(3):29-32. |
| |
| Authors: | Luo Youxin Li Xiaorun Wu Changdong Yang Chunfeng Bian Xiaofang |
| |
| Affiliation: | Luo Youxin Li Xiaorun Wu Changdong Yang Chunfeng Bian Xiaofang(Central Research Institute of Building and Construction Co.Ltd,MCC Group,Beijing 100088,China) |
| |
| Abstract: | Rectangular steel welded pool has been used widely in environmental protection projects.Flat slab with low flexural capacity and weak stiffness is the common form of side plate and bottom plate.A combination reinforce method is used in the design of 200 m 3 steel welded atmospheric pressure pool on ground which includes stiffened plate,verticle column,transverse ring and linkage.The comparison with top-sides reinforce method and criss-cross reinforce method is shown that steel pool construction designed wit... |
| |
| Keywords: | steel welded rectangular pool combination-reinforce method taper bottom finite element model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
