首页 | 本学科首页   官方微博 | 高级检索  
     

钨合金动态力学性能的三维数值模拟研究
引用本文:刘海燕,宋卫东,栗建桥. 钨合金动态力学性能的三维数值模拟研究[J]. 材料工程, 2012, 6(6): 71-75. DOI: 10.3969/j.issn.1001-4381.2012.06.016
作者姓名:刘海燕  宋卫东  栗建桥
作者单位:1.北京理工大学宇航学院,北京,100081;2.北京理工大学爆炸科学与技术国家重点实验室,北京,100081
基金项目:国家自然科学基金(91016013;10772024);国家重点基础研究发展计划(2010CB8327006);新世纪优秀人才计划资助项目
摘    要:采用数值模拟的方法对钨合金在冲击载荷作用下的动态力学响应进行了研究.运用有限元动力分析程序建立了具有典型微观结构钨合金三维有限元单胞模型,对钨合金在拉伸载荷作用下的动态力学性能进行了数值模拟研究,分析了应变率对其力学性能的影响,给出了不同应变率条件下单胞模型的应力和应变分布云图,在与实验结果对比的基础上验证了该有限元模型的可靠性.

关 键 词:钨合金  动态力学性能  微观结构  数值模拟

Three Dimensional Numerical Analysis on Dynamic Mechanical Property of Tungsten Alloys
LIU Hai-yan , SONG Wei-dong , LI Jian-qiao. Three Dimensional Numerical Analysis on Dynamic Mechanical Property of Tungsten Alloys[J]. Journal of Materials Engineering, 2012, 6(6): 71-75. DOI: 10.3969/j.issn.1001-4381.2012.06.016
Authors:LIU Hai-yan    SONG Wei-dong    LI Jian-qiao
Affiliation:1 School of Aerospace Engineering,Beijing Institute of Technology, Beijing 100081,China;2 State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology,Beijing 100081,China)
Abstract:Dynamic behavior of tungsten alloys under impact loadings was investigated by using numerical simulations.Three dimensional finite element unit cell models with typical micro-structure of tungsten alloys were established.The dynamic mechanical properties of tungsten alloys under tensile loadings were investigated by numerical simulations.The effect of strain rates on the mechanical properties was analyzed.The stress and strain contours of the unit cell model at different strain rates were given.The reliability of the finite element models was verified through the comparison with experimental results.
Keywords:tungsten alloy  dynamic mechanical property  micro-structure  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号