| 热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能 |
| |
| 引用本文： | 杨瑞成,孟威,舒俊,胡天雷.热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能[J].机械工程材料,2009(11). |
| |
| 作者姓名： | 杨瑞成 孟威 舒俊 胡天雷 |
| |
| 作者单位： | 兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室;兰州理工大学有色金属合金及加工教育部重点实验室; |
| |
| 基金项目： | 甘肃省有色金属新材料重点实验室开放基金资助项目(SKL05011) |
| |
| 摘 要： | 通过对热轧410S不锈钢板材手工钨极氩弧焊(TIG)焊接接头的组织观察、无损检测、力学性能和耐晶间腐蚀性能试验,以及铁素体含量和显微硬度的测定,研究了热轧410S不锈钢板材TIG焊接接头的组织与性能。结果表明:采用TIG方法焊接410S不锈钢接头的抗拉强度不低于母材的,而且塑性良好;焊接接头的宏观形貌呈铸造粗大组织,并具有明显的外延生长特性;焊缝组织主要为柱状晶奥氏体+沿柱状晶分布的δ铁素体,δ铁素体体积分数为15%~20%;热影响区的马氏体在焊接热的作用下发生了M→γ→M相变,原处于晶界条带中细小的颗粒状马氏体被黑色的团块状马氏体所替代;该焊接接头的晶间腐蚀倾向按热影响区、母材、焊缝顺序依次降低。
|
| 关 键 词： | 410S不锈钢 钨极氩弧焊 焊接接头 显微组织 |
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates |
| |
| YANG Rui-cheng,MENG Wei,SHU Jun,HU Tian-lei.Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates[J].Materials For Mechanical Engineering,2009(11). |
| |
| Authors: | YANG Rui-cheng MENG Wei SHU Jun HU Tian-lei |
| |
| Affiliation: | YANG Rui-cheng1,2,MENG Wei1,SHU Jun1,HU Tian-lei1(1.State Key Lab.of Gansu Advanced Non-ferrous Metal Materials,2.Key Lab.of Non-ferrous Metal Alloys,The Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China) |
| |
| Abstract: | The microstructure and properties of TIG welded joint of hot rolled 410S stainless steel plates were studied by using metallographic microscopy,nondestructive examination(NDE),mechanical property testing and Huey test,ferrite content and microhardness measuraments.The results show that the tensile strength of TIG welded joint was not less than that of base-metals,and the ductility was fine.The macrograph of the weld joint exhibited coarse structure with epitaxial growth characteristic.Microstructure of weld... |
| |
| Keywords: | 410S stainless steel TIG welded joint microstructure |
| 本文献已被 CNKI 等数据库收录！ |
|
