| 球磨和辊轧法制备微细锌片的机理研究 |
| |
| 引用本文： | 陈岁元,刘常升,李会莉,才庆魁.球磨和辊轧法制备微细锌片的机理研究[J].有色矿冶,2003,19(3):37-40. |
| |
| 作者姓名： | 陈岁元 刘常升 李会莉 才庆魁 |
| |
| 作者单位： | 东北大学,材料与冶金学院,辽宁,沈阳,110004 |
| |
| 基金项目： | 教育部青年骨干教师资助计划项目 (批准号 :991110 ) |
| |
| 摘 要： | 为了获得金属锌的片状颗粒，使之形状与尺寸范围符合水性涂料的原料要求，采用湿式球磨和辊轧法制备技术制备出了微细Zn片，对比研究了两种工艺条件下的成片过程。用扫描电镜和图象分析仪研究了Zn片的形貌、尺寸和片径分布，实验结果显示，由轧制法而获得的锌片要比球磨获得的锌片更符合涂料技术指标要求。
|
| 关 键 词： | 锌片 球磨辊轧 片径分布 |
| 文章编号： | 1007-967X(2003)03-0037-04 |
| 修稿时间： | 2003年1月6日 |
A Study of Mechanism of Prepared Ultrafine Zn Flake by Wet Ball Milling and Rolling Methods |
| |
| CHEN Sui yuan,LIU Chang sheng,LI Hui li,CAI Qing kui.A Study of Mechanism of Prepared Ultrafine Zn Flake by Wet Ball Milling and Rolling Methods[J].Non-Ferrous Mining and Metallurgy,2003,19(3):37-40. |
| |
| Authors: | CHEN Sui yuan LIU Chang sheng LI Hui li CAI Qing kui |
| |
| Abstract: | In order to obtain Zn flake particles whose shape and size range up to watery coating material standard, wet ball milling and rolling methods had been adopted to prepare the ultrafine Zn flake in the experiment. In comparasion, processes of the flake formation with two technical conditions are discussed in the article. The comparasion of the experiment results on the basis of the figures,size and analized with SEM and Image analysis indicats that the zn flake obtained with rolling mehtod fits the coating technical standard better than that obtained with ball milling method. |
| |
| Keywords: | Zn flake ball milling rolling diameter distribution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
