首页 | 本学科首页   官方微博 | 高级检索  
     

高强热轧双相钢中组织对性能的影响
引用本文:吴腾,李会,吴润,宋述鹏.高强热轧双相钢中组织对性能的影响[J].材料科学与工程学报,2018(1):1-4,30.
作者姓名:吴腾  李会  吴润  宋述鹏
作者单位:武汉科技大学材料与冶金学院,湖北武汉,430080 涟源钢铁有限公司技术中心,湖南娄底,417009
基金项目:国家自然科学基金资助项目,湖北省自然科学基金资助项目
摘    要:采用低成本成分设计,应用超快冷技术为核心的新一代TMCP技术可以得到强韧性较好的高强热轧双相钢,本文研究了该试验钢组织对性能的影响。研究表明:铁素体晶粒尺寸在5μm处波动;条状马氏体比块状马氏体的n值要高;抗拉强度随马氏体体积分数的增加而增加;组织中小尺寸的铁素体和马氏体提高了裂纹弛豫能力,有利于试样的韧性和n值的提高。

关 键 词:热轧双相钢  超快冷  力学性能  显微组织  hot-rolled  dual  phase  steel  ultra  fast  cooling  mechanical  property  microstructure

Effect of Microstructure on Mechanical Properties of High Strength Hot-rolled Dual Phase Steel
WU Teng,LI Hui,WU Run,SONG Shupeng.Effect of Microstructure on Mechanical Properties of High Strength Hot-rolled Dual Phase Steel[J].Journal of Materials Science and Engineering,2018(1):1-4,30.
Authors:WU Teng  LI Hui  WU Run  SONG Shupeng
Abstract:By using inexpensive composition design,and ultra fast cooling technology as the core of a new generation TMCP technology,high strength hot-rolled dual phase steel with better obdurability was obtained.And then the effect of the microstructure on steel properties have been studied Results show that Ferrite grain size fluctuates 5μm;Strip martensite of n value is higher than the nubbly martensite;Tensile strength increases with the increase of martensite volume fraction;small size of ferrite and martensite microstructure could improve the ability of relaxation crack,benefit to the improvement of the toughness and the n value.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号