| 过量Na~+对(K_(0.5)Na_(0.5))NbO_3-LiNbO_3无铅压电陶瓷相组成及结构的影响 |
| |
| 引用本文： | 汤威,刘云飞,王国勇,李鸿鹏,吕忆农.过量Na~+对(K_(0.5)Na_(0.5))NbO_3-LiNbO_3无铅压电陶瓷相组成及结构的影响[J].陶瓷科学与艺术,2011(2). |
| |
| 作者姓名： | 汤威 刘云飞 王国勇 李鸿鹏 吕忆农 |
| |
| 作者单位： | 南京工业大学材料科学与工程学院材料化学工程国家重点实验室; |
| |
| 基金项目： | 江苏省环保科技基金资助项目(2007022) |
| |
| 摘 要： | 通过固相反应法预合成0.94(K0.5Na0.5)NbO3-0.06LiNbO3(KNLN6)无铅压电陶瓷粉体。采用X线衍射仪(XRD)、扫描电子显微镜/能谱仪(SEM/EDS)和高分辨透射电子显微镜(HRTEM)对KNLN6试样进行性能表征。结果表明:按化学计量配比合成的KNLN6粉体中含有K3Li2Nb5O15(KLN)第二相;Na2CO3摩尔分数过量5%时,可有效地消除第二相KLN,从而获得单一钙钛矿结构的KNLN6粉体,同时,粉体的预烧温度降低了50℃;在1070℃下烧结2 h制备的Na2CO3过量5%的无铅压电陶瓷中,KNLN6晶体具有A位无序的单一正交钙钛矿结构,晶粒呈立方体状,平均尺寸约为10μm。
|
| 关 键 词： | 铌酸钾钠-铌酸锂 无铅压电陶瓷 晶体结构 |
Influences of excess Na~+ on phase composition and microstructure of (K_(0.5)Na_(0.5))NbO_3-LiNbO_3 lead-free piezoceramics |
| |
| Affiliation: | TANG Wei,LIU Yunfei,WANG Guoyong,LI Hongpeng,Lü Yinong (State Key Laboratory of Materials-Oriented Chemical Engineering,College of Materials Science and Engineering,Nanjing University of Technology,Nanjing 210009,China) |
| |
| Abstract: | Lithium sodium potassium niobate 0.94(K0.5Na0.5)NbO3-0.06LiNbO3(KNLN6) lead-free piezoelectric ceramic powders were prepared by solid state reaction technique.X-ray diffractometer(XRD),scanning electron microscope/energy-dispersive spectrometer(SEM/EDS) and high resolution transmission electron microscope(HRTEM) were used as property characteristic for KNLN6 samples.Results showed that the second phase K3Li2Nb5O15(KLN) was detected in stoichiometric KNLN6 powders.After introducing 5% excess Na2CO3 into the ... |
| |
| Keywords: | lithium sodium potassium niobate lead-free piezoelectric ceramics crystal structure |
| 本文献已被 CNKI 等数据库收录！ |
|
