首页 | 本学科首页   官方微博 | 高级检索  
     

微波加热烟杆制备微孔活性炭的研究
引用本文:彭金辉,张利波,张世敏,涂建华,夏洪应,范兴祥,郭胜惠.微波加热烟杆制备微孔活性炭的研究[J].材料科学与工程学报,2006,24(1):57-62.
作者姓名:彭金辉  张利波  张世敏  涂建华  夏洪应  范兴祥  郭胜惠
作者单位:昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093;昆明理工大学材料与冶金工程学院,云南,昆明,650093
基金项目:中国科学院资助项目 , 高等学校优秀青年教师教学科研奖励计划
摘    要:研究了微波加热烟杆氯化锌活化法制备微孔活性炭的新工艺.采用正交试验研究了氯化锌浓度、浸渍时间、微波功率和活化时间对活性炭得率和吸附性能的影响.最佳工艺条件为ZnCl2浓度25%,浸渍时间36h,微波功率为700W,加热时间为16 min时,所制备的活性炭的碘吸附值为1059.32 mg/g,亚甲基蓝吸附值为21 mL/0.1g,得率为32.90 %.该工艺将常规加热方法的预热、干燥、炭化和活化简化为一个过程,所需要加热时间仅为传统方法的1/13,产品活性炭的亚甲基蓝吸附值为国家一级品标准的2.33倍.同时测定了该活性炭的氮吸附等温线,通过BET法计算了活性炭的比表面积,并通过H-K方程、D-A方程和密度函数理论(DFT)表征了活性炭的孔结构.结果表明:该活性炭为微孔型,BET比表面积为1214m2/g,总孔容为0.7387 mL/g,微孔占总孔容74.03%,中孔占24.54%,大孔占1.43%.

关 键 词:活性炭  微波加热  氯化锌  孔径分布  吸附性能
文章编号:1673-2812(2006)01-0057-05
修稿时间:2005年2月8日

Study on Preparation of Micropore Activated Carbons from Tobacco Stems Impregnated with Zinc Chloride by Microwave Heating
PENG Jin-hui,ZHANG Li-bo,ZHANG Shi-min,TU Jian-hua,XIA Hong-ying,FAN Xing-xiang,GUO Sheng-hui.Study on Preparation of Micropore Activated Carbons from Tobacco Stems Impregnated with Zinc Chloride by Microwave Heating[J].Journal of Materials Science and Engineering,2006,24(1):57-62.
Authors:PENG Jin-hui  ZHANG Li-bo  ZHANG Shi-min  TU Jian-hua  XIA Hong-ying  FAN Xing-xiang  GUO Sheng-hui
Abstract:A novel method of preparing micropore activated carbons from tobacco stems impregnated with zinc chloride by microwave heating was studied.The effects of impregnating time,concentration of zinc chloride solution,microwave power and heating time on the yield and adsorption properties of activated carbons were systematically studied via orthogonal experiments.The optimum conditions were as follows: concentration of zinc chloride solution 25% and impregnating time 36 hours,microwave power 700 watts,heating time 16 minutes.Under above conditions,the yield of the activated carbons was 32.90%.The methylene blue adsorption reached 21 mL/0.1g,and the iodine number was 1059.32 mg/g.The microwave heating method can complete conventional processing of pre-heating,drying,carbonization and activating in one stage.The heating time was only 1/13 times as fast as that of the conventional process.The methylene blue adsorption was 2.33 times of that the first grade product specified in the National Standard.Furthermore,the activated carbons prepared at optimum conditions were tested by nitrogen adsorption at 77 K.The specific surface area of activated carbons was 1214 m~2/g by BET method.The porous structures of the activated carbons were investigated by Horvath-Kawazoe equations,Dubinin-Astakhov equations and Density Functional Theory.It was shown that the activated carbon was microporous with 0.7387 mL/g total pore volume,of which 74.03% was micropore volume,24.54% was mesopore volume and 1.43% was macropore volume.
Keywords:activated carbon  microwave heating  zinc chloride  pore size distribution  adsorption properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号