| 板料单点渐进成形数值模拟研究 |
| |
| 引用本文： | 李湘吉,李明哲,蔡中义. 板料单点渐进成形数值模拟研究[J]. 锻压技术, 2009, 34(4). DOI: 10.3969/j.issn.1000-3940.2009.04.018 |
| |
| 作者姓名： | 李湘吉 李明哲 蔡中义 |
| |
| 作者单位： | 吉林大学,辊锻工艺研究所,吉林,长春,130025;吉林大学,辊锻工艺研究所,吉林,长春,130025;吉林大学,辊锻工艺研究所,吉林,长春,130025 |
| |
| 基金项目： | 国家自然科学基金资助项目(50605028);;吉林大学“985工程”资助项目 |
| |
| 摘 要： | 板料单点渐进成形过程变形复杂、影响因素多,工艺参数选择是提高成形质量和成形效率的关键。对单点渐进成形过程进行数值模拟,分析了成形件的应力分布和厚度变化以及成形路径、进给量等工艺参数对成形过程的影响。结果表明:成形件最大应力和最大厚度减薄发生在底面附近;采用螺旋进给方式可有效提高成形质量和成形效率。实验结果显示,实验结果与数值模拟结果基本吻合。
|
| 关 键 词： | 板料 渐进成形 数值模拟 |
Numerical simulation of sheet metal incremental forming |
| |
| LI Xiang-ji,LI Ming-zhe,CAI Zhong-yi. Numerical simulation of sheet metal incremental forming[J]. Forging & Stamping Technology, 2009, 34(4). DOI: 10.3969/j.issn.1000-3940.2009.04.018 |
| |
| Authors: | LI Xiang-ji LI Ming-zhe CAI Zhong-yi |
| |
| Affiliation: | Roll Forging Research Institute;Jilin University;Changchun 130025;China |
| |
| Abstract: | For the complex distortion and the numerous influence factors in single point incremental forming process of sheet metal,the process parameter selection is the key to improve forming quality and forming efficiency.Single point incremenal forming process was studied by finite element method,and the distribution of stress and the changing tendency of thickness were analyzed,through the numerical simulation on different amount of feed and forming paths,the effect of forming path and feed on forming result were... |
| |
| Keywords: | sheet metal incremental forming numerical simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
