| 工艺参数对筒体纵向焊接残余应力影响的模拟研究 |
| |
| 引用本文： | 迟露鑫,麻永林,邢淑清,陈芙蓉,陈重毅.工艺参数对筒体纵向焊接残余应力影响的模拟研究[J].压力容器,2011(9):1-6,25. |
| |
| 作者姓名： | 迟露鑫 麻永林 邢淑清 陈芙蓉 陈重毅 |
| |
| 作者单位： | 内蒙古工业大学材料科学与工程学院;内蒙古科技大学材料与冶金学院; |
| |
| 基金项目： | 国家科技重大专项子课题(2009ZX04014-064-05) |
| |
| 摘 要： | 针对某公司生产的首次应用到核电上的SA508—3钢，为了得到简体上各区域残余应力大小及分布规律，定量地分析工艺参数对残余应力的影响，有效地控制焊接质量，采用ANSYS有限元建立60mm厚简体三维模型，模拟纵向焊接过程残余应力的变化。结果表明：工艺参数变化只对焊缝内、外表面中心区域以及焊缝沿厚度方向上的纵向残余应力影响比较大，焊接速度和焊接电压对残余应力曲线上的锯齿型波动产生的影响比较明显；焊接速度对残余变形的变化幅度影响最大，焊接速度与另外两个参数对残余变形影响的趋势相反。
|
| 关 键 词： | SA508—3钢 焊接残余应力 数值模拟 |
Simulation Study of Process Parameters on Residual Stresses Effect of Cylinder Longitudinal Weld |
| |
| CHI Lu-xin,MA Yong-lin,XING Shu-qing,CHEN Fu-rong,CHEN Zhong-yi.Simulation Study of Process Parameters on Residual Stresses Effect of Cylinder Longitudinal Weld[J].Pressure Vessel Technology,2011(9):1-6,25. |
| |
| Authors: | CHI Lu-xin MA Yong-lin XING Shu-qing CHEN Fu-rong CHEN Zhong-yi |
| |
| Affiliation: | CHI Lu-xin1,2,MA Yong-lin2,XING Shu-qing2,CHEN Fu-rong1,CHEN Zhong-yi2(1.College of Materials Science and Engineering,Inner Mongolia University of Technology,Huhhot 010051,China,2.College of Material and Metallurgy,Inner Mongolia University of Science and Technology,Baotou 014010,China) |
| |
| Abstract: | According to the new material which was SA508-3 steel for nuclear power,in order to obtain residual stress distribution,quantitative analysis of process parameters on residual stress effect,and effectively control welding quality,the residual stress field model of 60 mm thick wall cylinder were simulated by ANSYS.It was found that only the center of weld inner,outer surface and the weld thickness which were influenced by process parameters have more larger residual stress,and the serrated fluctuations of re... |
| |
| Keywords: | SA508-3 steel welded residual stresses numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
