Examples of metal and resin processing using high power diode lasers

In this work, the pitting corrosion resistance of welding duplex stainless steel 2205 was studied. Joints were made using the GMAW process with different fillers: duplex ER 2209 and two austenitic fillers (ER 316LSi and ER 308LSi). The microstructure obtained with the duplex ER 2209 filler is similar to the duplex 2205 base material, but the joints produced with the austenitic fillers cause a decrease of the α/γ phase ratio. In order to evaluate the influence of the filler on the weld, the pitting corrosion resistance was determined by means of an electrochemical critical pitting temperature test, and the mechanical properties by the hardness test. The phase imbalance produced for the different fillers causes variation of the pitting corrosion resistance and the mechanical properties. The variation in the mechanical properties of the material was also studied by means of hardness tests.