| 水辅助注射成型技术研究 |
| |
| 引用本文： | 杨建根,王冉,周雄辉.水辅助注射成型技术研究[J].工程塑料应用,2012,40(2):43-47. |
| |
| 作者姓名： | 杨建根 王冉 周雄辉 |
| |
| 作者单位： | 1. 景德镇陶瓷学院,江西景德镇333403;上海交通大学,上海200030
2. 上海交通大学,上海,200030 |
| |
| 基金项目： | 宁波重大科技专题项目(2010B10018) |
| |
| 摘 要： | 基于简化和假设,建立了水辅助注射成型数学模型;介绍了水辅助注射成型设备和实验装置,并探讨了水辅材料;对成型过程中的数值模拟及实验研究进行了综述,归纳总结出当前国内外水辅助注射成型研究的重点问题及最新进展。最后,对水辅助注射成型的技术难点、不足及研究方向进行了展望。
|
| 关 键 词： | 水辅助注射成型 数学模型 成型设备 数值模拟 实验研究 |
Research of Water Assisted Injection Molding Technology |
| |
| Yang Jiangen
,
Wang Ran
,
Zhou Xionghui.Research of Water Assisted Injection Molding Technology[J].Engineering Plastics Application,2012,40(2):43-47. |
| |
| Authors: | Yang Jiangen Wang Ran Zhou Xionghui |
| |
| Affiliation: | 1.Jingdezhen Ceramic Institute,Jingdezhen 333403,China; 2.Shanghai Jiao Tong University,Shanghai 200030,China) |
| |
| Abstract: | Based on simplification and assumptions,the mathematical models of water assisted injection molding were established.Molding equipment were described,and materials were explored as well.The molding process numerical simulation and experimental studies were reviewed,and the current domestic and international key issues and latest developments were summarized.Finally,technical difficulties,lacks and research directions were outlooked. |
| |
| Keywords: | water assisted injection molding mathematical models molding equipment numerical simulation experiment research |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
