| N-苯基马来酰亚胺改性苯丙乳液稳定性研究 |
| |
| 引用本文： | 张旺喜,徐保明,聂龙辉.N-苯基马来酰亚胺改性苯丙乳液稳定性研究[J].湖北工业大学学报,2011(5):40-42,65. |
| |
| 作者姓名： | 张旺喜 徐保明 聂龙辉 |
| |
| 作者单位： | 湖北工业大学化学与环境工程学院; |
| |
| 摘 要： | 通过一步加料和滴加引发剂的方法合成了N-苯基马来酰亚胺（NPMI）、丙烯酸乙酯和苯乙烯的三元共聚乳液,并对其性能进行了表征分析.通过单因素分析确定了合适的工艺条件,分析和讨论了NPMI用量对单体转化率、涂膜吸水率及耐热性的影响.结果表明：NPMI改性的苯丙乳液具有较高固含量、低凝聚量以及良好的热稳定性.
|
| 关 键 词： | 苯丙乳液 粘合剂 N-苯基马来酰亚胺 改性 |
Research on the Stability of NPMI Modified Styrene-acrylic Emulsion Polymerization |
| |
| ZHANG Wang-xi,XU Bao-ming,NIE Long-hui.Research on the Stability of NPMI Modified Styrene-acrylic Emulsion Polymerization[J].Journal of Hubei University of Technology,2011(5):40-42,65. |
| |
| Authors: | ZHANG Wang-xi XU Bao-ming NIE Long-hui |
| |
| Affiliation: | ZHANG Wang-xi,XU Bao-ming,NIE Long-hui(School of Chemical & Environment Engin.,Hubei Univ.of Tech.,Wuhan 430068,China) |
| |
| Abstract: | The copolymer emulsion based on N-phenyl maleimide(NPMI),ethyl acrylate and styrene were synthesized through the step of feeding and dropping initiator,and its properties were characterized.The appropriate process condition is identified through the analysis of single factor,and the effect of the NPMI dosage on monomer conversion rate,water absorption of film and the heat tolerance are analysed and discussed.The result shows that NPMI modified styrene-acrylic emulsion is provided with high solid content,low... |
| |
| Keywords: | styrene acrylic emulsion adhesive NPMI modified |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
