| 立式钻床立柱结构动静态分析与结构改进 |
| |
| 引用本文： | 仇君,朱晓慧,黄伟,李小周.立式钻床立柱结构动静态分析与结构改进[J].机床与液压,2012,40(7):152-155. |
| |
| 作者姓名： | 仇君 朱晓慧 黄伟 李小周 |
| |
| 作者单位： | 广西大学机械工程学院,广西南宁,530004 |
| |
| 基金项目： | 广西壮族自治区自然科学基金重点项目 |
| |
| 摘 要： | 以有限元理论为基础,建立立式钻床立柱结构的参数化模型,进行静态有限元分析,分析立柱结构承载及变形特点。在此基础上,采用选型法对立柱进行结构改进,并对改进后的模型做动态性能分析。结果表明:优化后,立柱静态性能提高,质量减少12.8%;立柱固有频率值与原固有频率值相近,满足结构动态性能的要求。
|
| 关 键 词： | 立柱 动静态有限元分析 选型法 结构改进 |
Static and Dynamic Performance Analysis and Structure Improvement of Pillar in Upright Drill Press |
| |
| QIU Jun
,
ZHU Xiaohui
,
HUANG Wei
,
LI Xiaozhou.Static and Dynamic Performance Analysis and Structure Improvement of Pillar in Upright Drill Press[J].Machine Tool & Hydraulics,2012,40(7):152-155. |
| |
| Authors: | QIU Jun ZHU Xiaohui HUANG Wei LI Xiaozhou |
| |
| Affiliation: | (College of Mechanical Engineering,Guangxi University,Nanning Guangxi 530004,China) |
| |
| Abstract: | Based on finite element theory,the parametric model of the pillar in upright drill press was established,and its static performance was analyzed.The structural deformation of pillar drilling load and deformation characteristics were analyzed.Based on these,the choosing shape method was used to improve structure of the pillar,and the improved model’s dynamic performance analysis was done.The results show that the pillar static performance was improved after optimization,and the weight of the pillar lowers by 12.8%.The natural frequency of the improved pillar is closed to that of the original model,thus the dynamic performance requirements of the pillar are met. |
| |
| Keywords: | Pillar Static and dynamic finite element analysis Choosing shape method Structure improvement |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
