| 基于LabVIEW的旋转机械远程故障诊断系统研究 |
| |
| 引用本文： | 张博,王亚超. 基于LabVIEW的旋转机械远程故障诊断系统研究[J]. 现代制造工程, 2007, 0(12): 106-109 |
| |
| 作者姓名： | 张博 王亚超 |
| |
| 作者单位： | 天津工业大学管理学院,天津,300160 |
| |
| 摘 要： | 针对北京燕山石化炼油厂某烟气轮机进行旋转机械远程故障诊断的研究,设计并开发了远程故障诊断系统原型.首先通过转子实验台模拟烟机的振动信号,以LabVIEW为平台对转子振动信号进行获取和分析;然后利用BP神经网络的方法对其进行故障诊断;最后通过B/S结构网络体系的构建,完成整个远程故障诊断原型系统的开发.
|
| 关 键 词： | LabVIEW 旋转机械 远程故障诊断 LabVIEW 旋转机械 远程故障诊断系统 研究 rotating machinery fault diagnosis system remote based 原型系统 网络体系 结构 方法 神经网络 利用 分析 转子振动信号 平台 烟机 模拟 转子实验台 |
| 文章编号： | 1671-3133(2007)12-0106-04 |
| 修稿时间： | 2007-06-29 |
Study on LabVIEW based remote fault diagnosis system of rotating machinery |
| |
| Zhang Bo,Wang Ya-chao. Study on LabVIEW based remote fault diagnosis system of rotating machinery[J]. Modern Manufacturing Engineering, 2007, 0(12): 106-109 |
| |
| Authors: | Zhang Bo Wang Ya-chao |
| |
| Abstract: | Research on the remote fault diagnosis of rotating machinery based on a gas turbine of Beijing Yanshan Petrifaction Refinery,design and develop prototype of remote fault diagnosis system.Simulate the vibration signal of gas turbine via experimental platform of rotor;capture and analyze the vibration signal on the platform of LabVIEW;carry out fault diagnosis with the method of BP neural network.Finally by the construction of B/S structure network system,the development of the whole remote fault diagnosis prototype system was finished. |
| |
| Keywords: | LabVIEW Rotating machinery Remote diagnosis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
