| 基于FT232R的USB-RS232转换模块的设计 |
| |
| 引用本文： | 鲍兆伟,王林,徐琦,李云飞.基于FT232R的USB-RS232转换模块的设计[J].数字社区&智能家居,2008(3):1204-1207. |
| |
| 作者姓名： | 鲍兆伟 王林 徐琦 李云飞 |
| |
| 作者单位： | [1]苏州大学计算机科学与技术学院,江苏苏州215006 [2]盈正豫顺电子有限公司,江苏苏州215128 |
| |
| 基金项目： | 江苏省高校自然科学研究项目资助（项目编号03KJB520128）;苏州市科委科技攻关项目资助（项目编号SNG0712）;苏州大学莙政学者基金资助 |
| |
| 摘 要： | 通用串行总线（USB）以其传输速度快、占用资源少、真正的即插即用等优点正在逐步成为通用的计算机与外设的接口而取代传统的RS232总线。以传统的RS232接口为数据通信通道的外部设备与PC的通信面临一个转换的问题。该文介绍的是基于FT232R芯片实现USB和RS232之间的转换模块的设计。使用此芯片优点是数据收发和协议转换工作全部由芯片独立完成，而无需干预。
|
| 关 键 词： | 通用串行总线(USB) RS232总线 通信转换 FT232R |
A Converter Module Design about USB-RS232 Based on FT232R |
| |
| Affiliation: | BAO Zhao-wei,WANG Lin,XU Qi,LI Yun-fei(1.College of Computer Science and Technology, Suzhou University, Suzhou 215006, China;2.Abler Electronics (Suzhou) Co. Ltd, Suzhou 215128, China) |
| |
| Abstract: | The USB has a lot of advantages, such as fast transmission speed, less material occupation, true plug and play, which is gradually becoming the interface between the general computer and peripheral equipment, and instead of the traditional RS232. The peripheral equipment of data communication based on RS232 faces a transforming problem when it corresponds with PC. This article introduces the designs of the transforming module between USB and RS232, which is realized on the basis of FT232R chip. Using this chip can complete the tasks of data receiving, data transmiting and protocol transforming independently. None of the artificial intervenes. |
| |
| Keywords: | Universal Serial Bus （USB） RS232 bus communication converter FT232R |
| 本文献已被 维普 等数据库收录！ |
|
