| 酸性气流脱除物STW-3#对NR硫化性能影响的研究 |
| |
| 引用本文： | 朱信明.酸性气流脱除物STW-3#对NR硫化性能影响的研究[J].世界橡胶工业,2005,32(6):3-5. |
| |
| 作者姓名： | 朱信明 |
| |
| 作者单位： | 徐州工业职业技术学院,江苏,徐州,221140 |
| |
| 摘 要： | 酸性气流脱除物是净化天然气、合成气、煤气时脱除的物质，STW-3#是由该物质制成的样品之一。就STW-3#对NR硫化性能的影响进行了研究。结果表明，STW-3#对NR有较好的硫化促进特性和一定的软化增塑作用；其用量3.0份以下时，硫化特性较差，3．0份以上时硫化特性较好，但超过4．0份时有粘辊和喷霜现象。它与促进剂M并用时，硫化特性与促进剂D相似。
|
| 关 键 词： | 酸性气流脱除物 STW-3# 硫化特性 |
| 文章编号： | 1671-8232(2005)06-0003-03 |
Study on the Influence of Acid Gases Extractant STW-3# on Vulcanizing Properties of NR |
| |
| ZHU Xin-ming.Study on the Influence of Acid Gases Extractant STW-3# on Vulcanizing Properties of NR[J].World Rubber Industry,2005,32(6):3-5. |
| |
| Authors: | ZHU Xin-ming |
| |
| Abstract: | STW-3~# is one of the acid gases extractant produced from natural gas, synthetic gas or coal gas. The influence of STW-3~# on vulcanizing properties of NR had been studied. The results showed that STW-3~# could accelerate cure and had some plastification; better properties were achieved by adding over 3.0 phr, but rubber compound contained over 4.0 phr was easy roll-sticking and blooming; it's effects were similar to accelerator D when blended with accelerator M. |
| |
| Keywords: | Acid gases extractant STW-3~# Vulcanizing Properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
