Synthesis of volcanic ash-based geopolymer mortars by fusion method: Effects of adding metakaolin to fused volcanic ash |
| |
Authors: | H. Tchakoute Kouamo J.A. Mbey A. Elimbi B.B. Kenne Diffo D. Njopwouo |
| |
Affiliation: | 1. Laboratoire de Physico-Chimie des Matériaux Minéraux, Université de Yaoundé I. Faculté des Sciences, Département de Chimie Inorganique, B.P. 812 Yaoundé, Cameroon;2. Laboratoire Environnement et Minéralurgie, UMR 7569, CNRS-Université de Lorraine, 15 Avenue du Charmois, B.P. 40, F-54501 Vandoeuvre-Lès-Nancy Cedex, France |
| |
Abstract: | The present study aimed at improving the properties of geopolymer mortars obtained from volcanic ash as a source material. An alkali fusion process was used to promote the dissolution of Si and Al species from the volcanic ash and thus to enhance the reactivity of volcanic ash. Various amount of metakaolin (30%, 40%, 50% and 60% MK by weight) was used to consume the excess alkali needed for the fusion. The amount of amorphous phase was determined both in the volcanic ash and the fused volcanic ash and X-ray diffraction analysis was used to evaluate effect of the alkaline fusion method. Geopolymers were prepared by alkali activation of mixtures of powders of fused volcanic ash, various amount of metakaolin and river sand using a sodium silicate solution as activator. The geopolymer mortars were characterized by determination of setting time, linear shrinkage, scanning electron microscopy and compressive strength. The results of this study indicate that geopolymer mortars synthesized by the fusion method exhibit low setting time (7–15 min), low shrinkage (0–0.42%) and high compressive strength (41.5–68.8 MPa). This study showed that, by enhancing the reactivity of volcanic ash by alkali fusion and balancing the Na/Al ratio through the addition of metakaolin, all volcanic ashes can be recycled as an alternative source material for the production of geopolymers. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|