| 椭圆截面工件车削加工 |
| |
| 引用本文： | 徐元周,颉潭成,南翔,王红茹. 椭圆截面工件车削加工[J]. 制造技术与机床, 2007, 0(9): 33-34 |
| |
| 作者姓名： | 徐元周 颉潭成 南翔 王红茹 |
| |
| 作者单位： | 河南科技大学,河南洛阳,471003 |
| |
| 摘 要： | 通过对工件椭圆截面的分析,提出了一种新型的椭圆截面车削加工的方法,在比较了目前的椭圆插补算法的基础上,设计了一种采用极坐标的、适合于车削系统使用的新型的椭圆插补算法。
|
| 关 键 词： | 椭圆插补 车削加工 椭圆截面工件 |
| 修稿时间： | 2006-09-25 |
Turning of Ellipse Cross-section Part |
| |
| XU Yuanzhou,XIE Tancheng,NAN Xiang,WANG Hongru. Turning of Ellipse Cross-section Part[J]. Manufacturing Technology & Machine Tool, 2007, 0(9): 33-34 |
| |
| Authors: | XU Yuanzhou XIE Tancheng NAN Xiang WANG Hongru |
| |
| Affiliation: | Henan University of Science and Technology, Luoyang 471003, CHN |
| |
| Abstract: | Based on the analysis on the ellipse section, a new method of turning for ellipse cross-section part is presented. Elliptical interpolation method is provided, and this method is fit for turning and is different to the passing ones explained in other literatures. Polar coordinate is introduced to the new method. |
| |
| Keywords: | Elliptical Interpolation Turning Ellipse Cross-section Part |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
