首页 | 本学科首页   官方微博 | 高级检索  
     

不同前处理方法测定植物油中重金属的研究
引用本文:倪张林,汤富彬,屈明华. 不同前处理方法测定植物油中重金属的研究[J]. 中国油脂, 2012, 37(7): 85-87
作者姓名:倪张林  汤富彬  屈明华
作者单位:中国林业科学研究院亚热带林业研究所,国家林业局经济林产品质量检验检测中心(杭州),浙江富阳311400
基金项目:中央级公益性科研院所基本科研业务费专项资金
摘    要:考察了湿法消解、干法灰化、微波消解3种不同前处理方法对植物油中重金属含量测定结果的影响。结果表明,硝酸-过氧化氢-高氯酸湿法消解为植物油前处理的最佳方法。采用石墨炉原子吸收光谱法测定植物油中的铅、镉、铬,线性范围内相关性良好,相关系数大于0.99,加标回收率分别为88.2%、94.5%、84.9%,RSD分别为8.5%、5.3%、9.1%,检出限分别为6.21、0.89、1.99μg/kg。该方法耗时短、操作简单,应用于植物油中重金属含量的测定,结果令人满意。

关 键 词:植物油  前处理方法  重金属  石墨炉原子吸收光谱法

Determination of heavy metals content in vegetable oils with different preprocessing methods
NI Zhanglin , TANG Fubin , QU Minghua. Determination of heavy metals content in vegetable oils with different preprocessing methods[J]. China Oils and Fats, 2012, 37(7): 85-87
Authors:NI Zhanglin    TANG Fubin    QU Minghua
Affiliation:(Quality Testing Center for None-wood Forest Products of State Forestry Administration(Hangzhou), Research Institute of Subtropical Forestry,CAF,Fuyang 311400,Zhejiang,China)
Abstract:Effects of three preprocessing methods,including wet digestion,ashing digestion and microwave digestion on the determination of heavy metals in vegetable oil were studied.After comparison,wet digestion method with HNO3-H2O2-HClO4 was the best,and graphite aurnace atomic absorption spectrometry(GFAAS)was used to determine lead,cadmium and chromium in vegetable oil.This method had a good linear relation(r>0.99).The recovery rate of lead,cadmium and chromium were 88.2%,94.5% and 84.9%,respectively,the relative standard deviation were 8.5%,5.3% and 9.1%,respectively,and the detection limits were 6.21,0.89 and 1.99 μg/kg,respectively.
Keywords:vegetable oil  preprocessing methods  heavy metal  GFAAS
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号