|
|||||
|
|
| 某卧式吸尘器中框零件结构设计分析 | |
| 引用本文： | 钱秋婧,陈炳发. 某卧式吸尘器中框零件结构设计分析[J]. 江苏机械制造与自动化, 2014, 0(1): 34-36 |
| 作者姓名： | 钱秋婧 陈炳发 |
| 作者单位： | 南京航空航天大学机电学院,江苏南京210016 |
| 摘 要： | 以吸尘器中框零件为例,分析其结构设计约束条件即功能性结构设计约束和工艺性结构设计约束,具体说明在两种设计约束下,吸尘器中框零件的设计规则与方法,标定了常用值.随后用CAE软件Moldflow模拟仿真该零件的的注塑过程,讨论在不同壁厚设计下的零件成型翘曲量,得出合适的零件壁厚值.最后总结了此类小家电塑胶件设计的通用性方法. |
| 关 键 词： | 吸尘器中框 结构设计 Moldflow 翘曲分析 |
Structural Design and Analysis of Parts of Horizontal Vacuum Cleaner |
|
| QIAN Qiu-jingNanjing University of Astronautics and Aeronautics,Nanjing,China CHEN Bing-fa. Structural Design and Analysis of Parts of Horizontal Vacuum Cleaner[J]. Jiangsu Machine Building & Automation, 2014, 0(1): 34-36 | |
| Authors: | QIAN Qiu-jingNanjing University of Astronautics Aeronautics Nanjing China CHEN Bing-fa |
| Affiliation: | QIAN Qiu-jing(Nanjing University of Astronautics and Aeronautics, Nanjing 210016, China) CHEN Bing-fa(Nanjing University of Astronautics and Aeronautics, Nanjing 210016, China) |
| Abstract: | This paper addresses the structural design of plastic parts for a vacuum cleaner,discusses its functional structure design and manufacture constraints,design criteria and common values under these conditions.The simulation of injection molding process is conducted by CAE software Moldflow,to get the warp values under different thickness values of the plastic parts,and to choose the best thickness value.At last,the paper concludes plastic parts design versatility for such small appliances. |
| Keywords: | plastic part of vacuum cleaner structural design moldflow warp analysis |
| 本文献已被 维普 等数据库收录！ | |